美國Dytran5800B2是一種通用型IEPE脈沖錘/力錘，是利用安裝有力傳感器的“力錘"，用自定義的力來擊打（激勵）被試驗結構物，來鑒定共振態，取得動態行為研究里的重要參數

產品型號：

更新時間：2024-06-26

廠商性質：代理商

訪問量：374

產品咨詢 13352927502

詳細介紹在線留言

美國Dytran 5800B2是一種通用型IEPE脈沖錘/力錘，是利用安裝有力傳感器的“力錘"，用自定義的力來擊打（激勵）被試驗結構物，來鑒定共振態，取得動態行為研究里的重要參數。借助于現代測試技術和微機的FFT以脈沖試驗原理和模態理論迅速求得結構模態參數的一種快速、簡便、有效的方法。同時也可以檢測被測物結構健康狀態。

在錘擊試驗中，對被測結構輸入的是激勵（錘擊）力信號，通過測量結構各點的響應（輸出）加速度信號，即可求得結構的傳遞函數。

The Dytran 5800B2 is a general purpose IEPE impulse hammer used to excite structures or machinery with a definable impulse force. The impulse is used to identify resonances, an important measurement parameter for the study of dynamic behavior, as well as to help determine the overall structural health of a test specimen. Available with a 50 lbf range, the Dytran model 5800B2 features a 100-gram head weight and is supplied with three interchangeable impact tips.

The Dytran Dynapulse™ impulse hammers incorporate a special acceleration compensated piezoelectric force sensor in the hammer head at the striking face, ensuring a smooth frequency spectrum that is free from anomalies. Electrical connection is achieved via a BNC connector jack located at the end of the hammer handle.

型號	量程 (lb)	靈敏度 (mV/Lb)	固有頻率 (kHz)	力值 (Lb)	錘頭重 (g)	工作溫度 (℃)
5800B1/B3/B4/B5	10-1000	500-5	75	200-2000	100g	-40 to +65
5801B4/B5/B6	1-10	500-5000	75	6000-8000	100g	-40 to +65
5802A TEDS	5000	1	75	10000	1000	-40 to +65
5803A TEDS	5000	1	75	10000	5000	-40 to +65
5805A	5000	1	75	10000	450	-40 to +65
5850B	5000	1	>75	10000	5.3	-40 to +65
5860B	50	100	0.001-8	±100	60	-100-+250

特性

1. 靈敏度100 mV/lbf sensitivity

2. 測量50 lbf（222.4N）

3. 力值1000 lbf

4. BNC連接器

5. 測量頭重100g

6. IEPE

應用

1. 機械零部件檢測

2. MIMO實驗

3. 模態與結構分析

4. 根源故障分析

5. 應用在車架，軸承箱，剎車片，工字梁，板和其它中小尺寸結構機械上。

Weight, Head 3.5 oz 100 grams

Head Material Stainless Steel Stainless Steel

Impact Tips Material Aluminum / Plastic Aluminum / Plastic

Sensitivity, ± 10 % 100 mV/LbF 22.5 mV/N

Range 50 Lbs. Force 222.4 N

Maximum Force 1,000 Lbs. Force 4448 N

Linearity [1] ±1 % Full Scale ±1 % Full Scale

Resonant Frequency 75 kHz 75 kHz

Stiffness, Force Sensor 11.4 Lb/μin 2.0 kN/μm

ELECTRICAL

Output Voltage F.S ±5 V ±5 V

Output Impedance, Max 100 Ω 100 Ω

Bias Voltage 7 to 12 VDC 7 to 12 VDC

Compliance Voltage Range 18 to 30 VDC 18 to 30 VDC

Supply Current Range 2 to 20 mA 2 to 20 mA

Discharge Time Constant, Nom 20 Sec 20 Sec

訂貨型號

5800B2 脈沖錘

5800B3 脈沖錘

5800B4 脈沖錘

5800B5 脈沖錘

5800B2T 脈沖錘TEDS

5800B3T 脈沖錘TEDS

5800B4T 脈沖錘TEDS

5800B5T 脈沖錘TEDS

5800BSL 脈沖錘

配件

1. Model 6250A aluminum impact tip, (1) model 6250P impact plastic tip, (1) model 6250PS soft plastic impact tip

2. Model 4114B1 current source power unit

3. 電纜線：6055A, 6089A

相關型號

型號	量程 (lb)	靈敏度 (mV/Lb)	固有頻率 (kHz)	力值 (Lb)	錘頭重 (g)	工作溫度 (℃)
5800B1/B3/B4/B5	10-1000	500-5	75	200-2000	100g	-40 to +65
5801B4/B5/B6	1-10	500-5000	75	6000-8000	100g	-40 to +65
5802A TEDS	5000	1	75	10000	1000	-40 to +65
5803A TEDS	5000	1	75	10000	5000	-40 to +65
5805A	5000	1	75	10000	450	-40 to +65
5850B	5000	1	>75	10000	5.3	-40 to +65
5860B	50	100	0.001-8	±100	60	-100-+250